Windows 95 install hardware

This page is a..

Work-in-Progress

Table of Content

#"# YouTube Video:

https://youtu.be/PgMKUezEEqk?si=PIrn4o6kqpj7CJmH

Windows 95 RTM bootdisk: https://essentials.86box.net/bootdisks/ Windows 95 RTM Installation Bootdisk (TEAC CDI) (3.5).IMG

Setup - Hardware & BIOS (in 86box)

Machine

Machine type: Socket 7-3V (not found) - USING: Socket 7 (Single Voltage)

Machine: ASUS P/I-P54TP4XE (not found) - USING: ASUS P/I-P55TP4XE

CPU type: Intel Pentium 75

Memory: 32 MB

Dynamic Recompiler UNCHECKED

Display

Video: [PCI] S3 Vision964 (Diamond Stealth64 VRAM)

Input devices

Mouse: Standard P/S2 Mouse (COM1, Two buttons)

Sound

Sound card: Sound Blaster AWE32

Settings:
Address: 0x220
EMU8000 Address: 0x620
MPU-401 Address: 0x330
IRQ: IRQ 5
Low DMA channel: DMA 1
High DMA channel: DMA 5
Onboard RAM: 512kB
Enable OPL: *checked*
Receive input (SB MIDI): *checked*
Receive input (MPU-401): *checked*

MIDI Out Device: System MIDI

Use FLOAT32 sound: checked (button: Nuked (more accurate))

Network

Mode: SLiRP

Adapter: [PCI] AMD PCnet-PCI II

Ports (COM & LPT)

LPT1 Device: Generic PostScript Printer

Storage controllers

HD Controller: Internal controller

FD Controller: Internal controller

Hard disks

C: Drive: “disk1C”, Custom large: 1023 MB (CHS: 2078, 16, 63), IDE, Channel 0:0

Floppy & CD-ROM drives

Floppy1: 3.5, 1.44MB

Floppy2: 5.25, 1.2MB

CD-ROM drives: ATAPI, 48x, Channel 1:0

BIOS

STANDARD CMOS SETUP

Primary Master, Secondary Master: Auto
Primary Slave: None
Secondary Slave: None

BIOS FEATURES SETUP

Boot Sequence: (A, CDROM, C)

PNP AND PCI SETUP

PNP OS INSTALLED: Yes
IRQ 5 USED BY ISA: Yes
DMA 1 USED BY ISA: Yes
DMA 5 USED BY ISA: Yes

SAVE & EXIT SETUP

Software notes

TCP/IP install

After Win 95 install, add TCP/IP, use IP-settings from Win3.11 note.

SLiRP - manual IP, DNS etc
IP: 10.0.2.15
Subnet: 255.255.255.0
Gateway: 10.0.2.2
DNS: 10.0.2.3
OK, OK etc, 
Reboot / Hard Reset
In Windows open DOS-prompt, "ping www.google.com"